Whatever project you choose to work on in your woodworking shop, you risk injuring yourself, especially if you use dangerous tools such as a table saw, router table, or planer.
To avoid injuries from these machines, consider using push blocks. Here’s a quick guide to finding the best push block for your workshop. To summarize, the best push blocks are as follows:
You’ve arrived at this page because you understand the value of the push block, but aren’t sure which one to get. Look no further for the best table saw push block, the best push block for router table, or the best push block for jointer.
Whatever the reason, this detailed buying guide was created to help you better understand push blocks and choose one that meets your needs.
Related Article: The best GRR-Ripper review
What is the purpose of a push block
Many accidents in the woodworking workshop are caused by rotating blades of tools such as a table saw or planer. Fingers are frequently amputated as a result of this. Some of these mishaps could have been avoided if a proper tool, such as a push block, had been used.
The purpose of a push block is to keep your fingers away from the blade. An additional purpose of the push block is to provide better control of the workpiece and prevent kickback. Better control also means that you will get better and more accurate cuts.
A push block is therefore not a fancy tool that you should have in your workshop to impress your friends. It is a safety tool that can save you a lot of serious injuries and suffering. My advice is: get one today!
How to use a push block
Using a push block is not that difficult and is actually quite self explanatory. Since this article is about finding the best table saw push block, best push block for jointer or best push block for router table, I won’t go into too much detail here.
If you want to delve into this, as well as other details about using a push block, it is recommended to read my previous article, Here’s Why You Should Use A Push Block (3 Reasons).
In short, you use a push block by making the correct settings and hooking the push block hook behind the wood. After setting the correct depth of the saw blade, of which you will find more information in the aforementioned article, you can safely work on the wood by means of a three-point pressure technique.
How can you distinguish between different available push blocks?
Ok, so you want a push block and go to your local hardware (or buy digital) and then you stand in front of that gigantic rack. Which one should you take? Which one is the best push block? Well with this first selection you will go a long way. You can read about the features to look out for in the section below, so don’t miss out on important information and read all the way to the end.
Additional tools and accessories
When it comes to the tools that come with push blocks, there are several types. Some companies give it a feather board, which increases security, while others build a push block with multiple functions, such as the GRR-RIPPER 3D Push Block. Some products are only push blocks, while others come in five-packs that include push sticks and other tools.
Several brands offer a variety of push block products on the market. Quality and features differ from one brand to the next, with some brands providing features that others do not. Each brand has unique advantages and disadvantages to offer in a push block, so you should conduct extensive research before selecting the best product for your needs.
What features should you look for to find the best push block?
So you’re looking for the best table saw push block, router table push block, or jointer push block. To choose the best push block, you must also know what to look for. When reviewing the list of available push blocks, there are a few key features to keep in mind.
The durability of the push blocks is, in my opinion, the most important feature of the table saw push block. To withstand punishment and assist you when using the blocks on any machine, the push block should be as strong as possible. You could lose a finger if you use the blocks on the machine and they break.
Another important point is that the push block you choose can be used on as many machines as possible. That way you can work with one push block on the table saw, router table band saw, planer, etc. It saves you a lot of costs, and you need a little less storage space.
Working with a push block every day means that every bit of extra weight can start to matter over time. Ok, extra weight will contribute to better grip, but try to let weight and grip meet somewhere in your choice. Look for a push block that is light enough but still offers enough grip.
Look for a push block that can give you enough stability. More stability means you will have better control over your wood, but it can also reduce the risk of injury. A stable push block, will have less tendency to tip over where your hands can be pulled into the blades.
Check that the construction material of the push block is of high quality. A good quality of the construction material will determine the safety of the tool. The quality of the construction material will also have an influence on the weight, a property that you could already read above.
The rubber base is simple to clean.
Look for push blocks with a rubber base that can be easily cleaned. The easier it is to clean, the less time you will need to spend here. A clean sole will slide less on the wood’s surface.
This is an important consideration because the sole comes into direct contact with a variety of waste materials such as sawdust and dust. A clean sole will slide less on the wood’s surface and thus provide a better grip.
The grip on the handle of the push block.
The grip plays an important role when using a push block. A reduced grip can lead to work errors or injuries. The push block must have a handle high enough that it will stay attached to the wood while it is being cut in the machine to ensure safe and reliable operation.
Aside from the grip on the handle, ergonomics are an important consideration. An ergonomic handle enables you to perform the same actions for a longer period of time while reducing the risk of fatigue or cramping, potentially lowering the risk of an accident.
Choosing a push block in a bright color can be advantageous. This makes it highly visible, which increases your chances of remembering to use it, but it also helps you distinguish between the surface of the wood and the blocks. This effectively reduces the user’s risk of any type of injury.
What is the best push block 2022?
01: GRR-RIPPER 3D push block (My favorite)
Don’t you think it is dangerous when you’re cutting wood and the blocks and sticks just slide over the piece of wood? To meet your needs, use the GRR-RIPPER 3D Push block. It has Green-Grip, which indicates that it has a strong grip. Furthermore, this push block protects your hands and prevents kickback.
This table saw push block’s fully adjustable design makes it much easier to use. This product also comes with a three-year extended warranty, giving you even more confidence in its performance.
GRR-RIPPER 3D push block
Total score: 4.3/5
02: Milescraft Push Block, Stick, and Featherboard Safety Bundle
The included feather board serves as a second fence, keeping your workpiece exactly where you want it. All you have to worry about is pushing forward through the blade while holding your piece against the table.
This kit includes a push stick with a nice and high handle, which should keep your fingers safe during use in addition to the standard push block. Both tools have a non-slip coating that will not scratch or damage your wood surface.
Milescraft Push Block, Stick, and Featherboard Safety Bundle
Total score: 4/5
03: INCRA PushGuard Push Block
The compact size of this push block makes it easy to maintain control while guiding your wood piece around the bit of a router table, something that would be less convenient with a larger block.
It’s also just as useful as a traditional push block, allowing you to safely rip planks or run over a joint.
A big plus of this product is the optional dirt shield, which protects the user from flying pieces of wood or dust. This can be a problem for precision jobs where you need to get a little closer to your workpiece.
INCRA PushGuard Push Block
Total score: 4/5
04: MLCS 9167 Safety Push Block and 5-Piece Stick Package
MLCS 9167 Safety Push Block and 5-Piece Stick Package
Total score: 3.3/5
05: POWERTEC 71009 Safety Push Block and Stick Set
With the Powertec 71009 push block and stick set, you have a versatile and solid 5-piece set that supports many woodworking jobs.
Each of the push sticks or push blocks from this set has a good build quality for durability and long-lasting use, even on a construction site.
This pack offers some sturdy push blocks and poles at a competitive price.
The handles are well-designed to be comfortable and ergonomic, helping to improve control and prevent kickback.
While the products are generally of solid construction, it’s worth pointing out that the push sticks don’t have the rubber friction pads like the blocks.
POWERTEC 71009 Safety Push Block and Stick Set
Total score: 3.6/5
How to make your own push block
If you can’t find what you’re looking for, you can consider making your own push block. As you can see in this YouTube video, I made push blocks for my workshop.
The advantage of these push blocks is that they have a retractable heel so that it never gets in the way and only fold out when they can grab behind the wood.
However, the disadvantage of these push blocks is that they are made of wood and are a lot heavier than the ones described above.
How to build your workshop on a budget?
Building a workshop can be daunting, filled with trial and error. Believe me, I’ve been in those shoes.
But it was “The Ultimate Small Workshop” course, a gem I discovered and now endorse on Christofix.com, that provided insights unparalleled to any other. This expertise empowered me to invest wisely and save substantially.
I really suggest it to all of my fellow DIYers and creators!
I hope this information will help you to find the best push block for your workshop , and that this blog inspires you.
Feel free to share this blog on Facebook, Pinterest, or other social media.
You can do this by using the buttons below or at the top of the blog.
It will be much appreciated.
I’m looking forward to seeing you soon in another blog or video.
Christophe, founder of Christofix.com
Woodworking | DIY | Home decoration